IT
4-262-026-21 (1)
Multi-Card
Reader/Writer
Operating Instructions
JP
Before operating the unit, please read this document
thoroughly, and retain it for future reference.
FR
DE
ES
IT
CS
MRW-EA7
© 2010 Sony Corporation
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
Overview ........................................... 4
Package Contents ............................... 4
System Requirements ........................ 4
Supported Media ............................... 5
Parts and Functions ............................ 6
This symbol on the product or
on its packaging indicates that
this product shall not be
treated as household waste.
Instead it shall be handed over
to the applicable collection
point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise be
caused by inappropriate waste handling of
this product.
The recycling of materials will help to
conserve natural resources. For more
detailed information about recycling of this
product, please contact your local Civic
office, your household waste disposal
service or the shop where you purchased the
product.
Connecting the Reader/Writer to a
Computer ........................................... 7
Using the Reader/Writer .................... 8
Reading and Writing Data on a
Removing a Memory Card ........... 10
Reading the Access Indicator ....... 11
Disconnecting the Reader/Writer
From the Computer .......................... 12
Software (Windows Only) ............... 13
Before you use the reader/writer
for the first time, you are
About “Memory Stick” media ......... 14
Usage Notes ..................................... 15
Troubleshooting ............................... 17
Specifications .................................. 18
Technical Support ............................ 18
End User License Agreement .......... 19
encouraged to install the Drive
Letter Recognition Software on
your computer.
Before connecting the reader/writer, see
page 13 for details about the Drive
Letter Recognition Software installation
procedure. Also see the end user license
agreement on page 19.
3
Overview
The MRW-EA7 (hereafter referred to as the
“reader/writer”) has the following features:
• Quick and simple data transfer – easily
transfer images from camera and mobile
phone to PC
• Compatible with “Memory Stick”,
“Memory Stick Duo”, “Memory Stick
Micro” (“M2”), CompactFlash,
Microdrive, xD-Picture Card,
MultiMediaCard, SD Memory Card,
microSD Card
System
Requirements
The reader/writer requires computers with
the following preinstalled operating systems.
• OS
– Windows
®
7
®
– Windows Vista
®
– Windows XP (Service Pack 2 or later)
®
– Windows 2000 Professional (Service
Pack 4 or later)
– Mac OS X 10.2, 10.3, 10.4, 10.5, 10.6
This product works with the standard
drivers in Windows.
• Drive Letter Recognition Software can be
download from the web site
• Quick to Connect – Hot-pluggable
USB-powered design
Package Contents
When you unpack the box, make sure that it
contains all the accessories listed below.
If anything is missing or damaged, contact
your retailer.
• MRW-EA7 Multi-Card Reader/Writer
• USB cable
• Read Me First
4
Other memory cards
*7
• MultiMediaCard
Supported Media
The reader/writer supports the following
media:
*7
• RS-MMC
• CompactFlash
• Microdrive
®
*8
®
• xD-Picture CardTM
*7
“Memory Stick” media
MMCplus and MMCmobile are supported,
but parallel data transfer is not supported.
The Microdrive requires more power than
other memory cards. When using a
Microdrive, remove other memory cards;
otherwise an error may occur due to a
shortage of power.
*1
• “Memory Stick” (without MagicGate)
*8
*1*2
• “MagicGate Memory Stick”
*1*2*3
• “Memory Stick” (with MagicGate)
• “Memory Stick Duo” (without MagicGate)
*1
*1*2
Notes
• “MagicGate Memory Stick Duo”
• “Memory Stick Duo” (with MagicGate)
• Not all memory cards are guaranteed to work.
Operation is not assured if non-supported
memory cards are used.
• The capacity of a file to be recorded/played back
is smaller than 4 GB per file according to the
specifications of the file system incorporated in
“Memory Stick.”
• Although operation check of this product has
been performed with up to 8 GB “Memory
Stick,” please note that the operation is not
guaranteed for every type of “Memory Stick.”
• In this manual, all types of media listed in
“Supported Media” are generically called
memory cards.
• I/O cards that are not memory cards, such as
GPS cards, are not supported.
• MultiMediaCards and SD Memory Cards use the
same slot, so you cannot use them at the same
time.
• The “Memory Stick” media all use the same slot,
so you cannot use them at the same time.
• The “Memory Stick Micro” (“M2”), microSD
Card, and microSDHC Card all use the same
slot, so you cannot use them at the same time.
• Only DOS format is supported. Memory cards in
other formats are not supported.
*1*2*3
*2*3
• “Memory Stick PRO”
*2*3
• “Memory Stick PRO Duo”
*2*3
• “Memory Stick PRO-HG Duo”
*2*3*4
• “Memory Stick Micro” (“M2”)
*1
“MagicGate” is the general name of a
copyright protection technology developed
by Sony.
Recording or playback of MagicGate data
that uses MagicGate technology is not
supported.
4-bit parallel data transfer is supported and the
data read/write timing will vary depending on
the medium.
“M2” is an abbreviation of “Memory Stick
Micro.” In this document, hereinafter, the
abbreviation “M2,” is used.
*2
*3
*4
SD memory cards
*5
• SD Memory Card
*5
• SDHCTM Memory Card
*5*6
• miniSDTM card
*5*6
• miniSDHCTM card
*5
• microSDTM card
*5
• microSDHCTM card
*5
Recording or playback of data that uses
copyright protection technology is not
supported.
*6
With adaptor (not supplied) only.
5
Parts and Functions
Front
Rear
A Access Indicator
G USB Port (mini B)
Connect to a computer using the supplied
USB cable.
This indicator is always lit. The indicator
blinks when the reader/writer accesses
data on a memory card.
B xD-Picture Card Slot
Insert xD-Picture Card here.
C “Memory Stick” Slot
Insert a “Memory Stick” media here.
D CompactFlash/Microdrive Slot
Insert either a CompactFlash or
Microdrive memory card here.
Remove all other memory cards before
using a Microdrive, because of its large
power consumption.
E MultiMediaCard/SD Memory Card
Slot
Insert either a MultiMediaCard or an SD
Memory Card here.
When inserting a miniSD Card, use an
adaptor (not supplied).
F “Memory Stick Micro” (“M2”)/
MicroSD and microSDHC Card Slot
Insert either a Memory Stick Micro
(“M2”) or microSD Card, and
microSDHC card here.
6
Notes for Windows
Connecting the
Reader/Writer to a
Computer
• On some computers, a message may appear
asking you to insert the operating system
disc. When this happens, follow the
computer’s instructions.
• On some computers, the USB Mass
Storage will function at reduced speed
message may appear, indicating that a hi-
speed USB device has been connected to a
USB port which does not support hi-speed
USB. If your computer has multiple USB
ports, try connecting to a different port.
Otherwise, close the message and continue
using the reader/writer with the current
port.
Simply connect the reader/writer to a
computer using the supplied USB cable.
1 Start the computer.
2 Connect the smaller connector
of the USB cable to the USB port
on the rear of the reader/writer.
3 Connect the larger connector of
the USB cable to the USB port on
the computer.
The computer recognizes the reader/
writer as a removable disk, and the
reader/writer is ready for use.
Notes
• Do not connect to the USB port on the computer
via an external USB hub.
• Depending on the computer and the status of its
operating system, the reader/writer may not
operate or may become unstable. If this occurs,
refer to the “Troubleshooting” section. (Page 17)
• After disconnecting the USB cable, wait at least
5 seconds before reconnecting it. (Otherwise, the
reader/writer may not be recognized.)
• When two or more USB devices are connected to
one computer, the reader/writer is not guaranteed
to operate simultaneously with some types of
USB device.
• You cannot access two or more memory cards
simultaneously on a single computer by
connecting additional memory card devices.
Remove any memory cards from the reader/
writer or turn off the other devices.
7
Notes
Using the Reader/
Writer
• Each card slot is designed so a card can only be
inserted in the correct direction.
• Insert only one memory card into the
corresponding slot. Do not insert multiple cards
at the same time.
• When inserting a mini SD Card, use an
appropriate adaptor (not supplied).
Inserting a Memory Card
• Do not insert a card upside down.
• Forcibly inserting the card may damage the card
or the slot.
• If a memory card is inserted incorrectly, you may
not be able to remove it. In the unlikely event
that a memory card becomes stuck in the reader/
writer, consult your local Sony dealer.
Insert a memory card into the corresponding
slot on the reader/writer.
When inserting a card, push it in as far as it
can go.
Insert one of the following
cards in this slot:
• “Memory Stick Micro”
(“M2”)
• “microSD Card and
microSDHC Card”
Insert one of the
following cards in
this slot:
• xD-Picture Card
Insert one of the following cards in
this slot:
• MultiMediaCard
• RS-MMC
• SD/SDHC Memory Card
• mini SD Card*
* Use an appropriate
adapter
(not supplied)
Insert one of the
following cards in this
slot:
Insert one of the following
cards in this slot:
• CompactFlash
• “Memory Stick”
(without MagicGate)
• “MagicGate Memory Stick”
• “Memory Stick”
• Microdrive
• “Memory Stick Duo”
(without MagicGate)
• “Memory Stick PRO”
• “Memory Stick PRO Duo”
• “Memory Stick PRO-HG Duo”
(with MagicGate)
• “Memory Stick Duo”
(without MagicGate)
• “MagicGate Memory Stick Duo”
8
Computer drive
name
Corresponding
memory card
Reading and Writing Data on a
Memory Card
CompactFlash
Microdrive
Removable Disk (E:)
Removable Disk (F:)
Removable Disk (G:)
Removable Disk (H:)
x For Windows other than Windows 7
The following explanation is illustrated with
screens from Windows XP.
The screens may differ for other versions of
Windows.
xD-Picture Card
MultiMediaCard
SD Memory Card
“Memory Stick” media
“Memory Stick Micro”
(“M2”) media
microSD Card
1 Open [My Computer].
Removable Disk (I:)
3 Insert a memory card into the
corresponding slot.
When a volume label has been assigned
to the memory card, the volume label will
be displayed together with the removable
disk icon.
2 Make sure the removable disk
icons appear in [My Computer].
4 Use the removable disk icon to
read or write data on the memory
card.
If the following message appears, the
memory card has not been recognized
correctly, even though the access
indicator lights up. Remove the card and
insert it again.
Drive letters for the removable disk icons
are assigned in alphabetical order to the
CompactFlash/Microdrive Slot,
xD-Picture Card Slot, MultiMediaCard /
SD Memory Card Slot, “Memory Stick”
Slot and “Memory Stick Micro” (“M2”)
media / microSD Card Slot.
For example, if the computer has an A:,
C:, and D: drive before connecting the
reader/writer, the drive letters will be
assigned as follows when the reader/
writer is connected:
9
x For Windows 7
Notes
• Use the removable disk icon for the memory
card you are using.
• It may take a while for the removable disk
icons to appear.
• If the removable disk icons do not appear,
follow the steps under “Disconnecting the
Reader/Writer From the Computer” in the
Operating Instructions (this manual) to
disconnect the reader/writer, and then wait
at least 5 seconds before reconnecting it.
If the [Safely Remove Hardware] icon
mentioned in step 1 of “Disconnecting the
Reader/Writer From the Computer” is not
displayed, skip the rest of the procedure and
immediately disconnect the reader/writer.
• Depending on your operating system and
the type of memory card you are using, the
reader/writer drives may be recognized as
“Local Disks” instead of “Removable
Disks,” but this will not affect their
operation.
Removing a Memory Card
Note
• Do not remove a memory card while the access
indicator is blinking. Doing so many cause
damage to the data stored on the memory card.
• Be sure to follow the steps described below.
Sony accepts no responsibility for any damage or
loss that results from removing a memory card
without following the procedure described
below.
x For Windows 7 and Macintosh
1 Insert a memory card into the
corresponding slot.
x For Windows other than Windows 7
The removable disk icon appears on the
desktop.
When a volume label is assigned to the
memory card, the volume label will be
displayed together with the removable
disk icon.
1 Make sure the access indicator
is not blinking.
2 Open [My Computer].
3 Right-click the removable disk
icon, and select [Eject].
2 Use the removable disk icon to
read or write data on the memory
card.
4 Pull the memory card straight
out.
x For Macintosh
x For Windows 7
1 Click the Start Button.
2 Click [Devices and Printers].
3 Right click [USB2.0 Card R/W]
drive icon.
4 Go to [Eject] with selection
option.
5 Pull the memory card straight
out.
10
x For Macintosh
Reading the Access Indicator
1 Close the files saved on the
memory card, and exit any
The access indicator changes according to the
status of the reader/writer, as follows:
currently running applications.
Reader/writer
Access indicator
status
2 Make sure the access indicator
is not blinking.
Connected to a
Lights up
computer
3 Drag the removable disk icon to
the [Trash].
Reading/writing data
Blinks
Alternatively, select the removable disk
icon, access the [File] menu on the menu
bar, and select [Eject “Untitled”] .
* Depending on the memory card, a different
label than “Untitled” may be shown.
Note
If data cannot be read from or written to the
memory card while the access indicator is lit, make
sure the card is fully inserted into the slot.
*
4 Pull the memory card straight
out.
11
3 Make sure the message “The
‘USB Mass Storage Device’
device can now be safely
removed from the system.”
appears, and then disconnect
the reader/writer.
Disconnecting the
Reader/Writer
From the
Computer
Notes
The ‘USB Mass Storage Device’ device
can now be safely removed from the
system.
• Do not disconnect the reader/writer from the
computer while the access indicator is blinking.
Doing so may cause damage to the data stored on
the memory card.
Note
The above steps are not required when removing a
memory card from the reader/writer.
• Be sure to follow the steps described below.
Sony accepts no responsibility for any damage or
loss that results from disconnecting the reader/
writer without following the procedure
described below.
x For Windows 7
1 Click the Start Button.
2 Click Devices and Printers.
x For Windows other than Windows 7
The following explanation is illustrated with
screens from Windows XP, and assumes that
drive names E:, F:, G:, H: and I: are assigned
to the four slots of the reader/writer.
The screens may differ for other versions of
Windows.
1 Click [Safely Remove Hardware]
on the task tray, located at the
lower right corner of the screen.
Click this icon
3 Right click [USB2.0 Card R/W]
drive icon.
Task tray
4 One by one ejects all removable
disks or select eject when all
medias are inserted to drive.
2 Click [Safely remove USB Mass
Storage Device - Drives (E:, F:,
G:, H:, I:)].
Click here
12
5 Pull the USB Cable out from
computer.
Installing the Drive
Letter Recognition
Software
(Windows Only)
Before starting installation, read the “End
User License Agreement.” (Page 19)
x For Macintosh
1 Close the files saved on the
memory card, and exit any
currently running applications.
2 Make sure the access indicator
is not blinking.
3 Drag the removable disk icon to
the [Trash].
1 Download the installer file from
the web site. The installer file can
be downloaded from the
Alternatively, select the removable disk
icon, access the [File] menu on the menu
following URL
*
bar, and select [Eject “Untitled”] .
* Depending on the memory card, a different
label than “Untitled” may be shown.
2 Close all programs that are still
running.
If no memory card is inserted into the
reader/writer, skip this step.
3 Double click the installer file.
(For windows Vista and windows
7, User Account Control window
will appear, click on [Allow].)
4 Disconnect the reader/writer
from the computer.
4 When the following window
appears, the installing is
completed, and click [OK].
13
Notes on Icons
Once the Drive Letter Recognition Software
is installed, the Removable Disk icons and
their descriptions change.
For example, if the computer has an A:, C:,
and D: drive before connecting the reader/
writer, the drive letters will be assigned as
follows when the reader/writer is connected:
About “Memory
Stick” media
What is “Memory Stick”?
“Memory Stick” is a compact-size IC
recording media with a high capacity. It has
been designed not only exchanging/sharing
digital data among “Memory Stick”
compliant products, but also for serving as a
removable external storage media that can
save data.
Corresponding
Computer drive name
memory card
CompactFlash
CF/Microdrive (E:)
MicroDrive
xD-Picture Card
xD (F:)
Notes on “Memory Stick”
MultiMediaCard
MMC/SD (G:)
SD Memory Card
On formatting (initialization)
• If you format media in which data has been
already written, all the data will be erased.
Please be cautious not to mistakenly erase
any important data.
• Please make sure to format (initialize) a
media by the formatter of a “Memory
Stick” compliant product. If it is initialized
with Windows Explorer, a FORMAT
ERROR occurs, it might become unusable
on this product.
“Memory Stick”
Memory Stick (H:)
media
“Memory Stick
Micro” (“M2”)
M2/microSD (I:)
media microSD
Card
Notes
• The use of this software is intended only for this
reader/writer. Other reader/writers may not work
with this software.
• Uninstall any similar software before installation
to ensure that the software functions properly.
About the size of “Memory Stick”
• This product has a slot that can take both
standard size and Duo size. All the products
with such a slot as this are equipped with a
system which automatically measures the
size of an inserted media. That’s why both
standard-size “Memory Stick” media and
smaller “Memory Stick Duo” media can be
used on this product without any Memory
Stick Duo Adaptor.
• Do not insert two or more pieces of media
at the same time. It might cause damage to
the product.
• When you use “Memory Stick Duo” media
and “Memory Stick Micro” media on this
product, please make sure to insert it in the
right direction.
• “Memory Stick Duo” media and “Memory
Stick Micro” media should be kept away
from small children to prevent them from
accidentally swallowing it.
14
• Do not stick anything other than the
supplied labels on the label area of
“Memory Stick” media.
• Stick a label precisely within the label area.
Make sure that the label does not go beyond
the area.
Usage Notes
“Memory Stick” Media
Notes on using “Memory Stick”
media
Notes on using “Memory Stick Duo”
media
Terminal
Terminal
Write-
Write-
Protected
switch
Protected
switch
Memo area
Label area
• When you use “Memory Stick Duo” media
without Write-Protected switch, be careful
not to edit or erase important data by
mistake.
• Do not remove “Memory Stick” media
while data is being read or written.
• Data may be damaged if:
– You remove “Memory Stick” media or
disconnect the USB cable while data is
being read or written.
– You use “Memory Stick” media in a
place where it is susceptible to static
electricity or electric noise.
• When you use “Memory Stick Duo” media
with Write-Protected switch, data cannot
be recorded, edited, or erased by “LOCK”
the switch.
• Use an object with a sharp tip to move the
Write-Protected switch.
• We recommend that you make a backup
copy of important data in “Memory Stick”
media.
• Do not press on the memo area strongly
when writing.
• Do not touch the terminal of “Memory
Stick” media with anything including your
fingers or metalic objects.
• Do not bent, drop or put a big impact on
“Memory Stick” media.
• Do not disassemble or modify “Memory
Stick” media.
• Keep “Memory Stick” media away from
water.
• Do not use or keep “Memory Stick” media
under an unfavorable condition as below:
– Extremely hot place (such as in a parked
car with windows closed in summer, a
spot under direct sunlight, or near an
electrical appliance that radiates heat).
– Humid place.
– Place near corrosive substances.
• If you set Write-Protected switch “LOCK,”
data cannot be recorded, edited, or erased.
Other Points to Note
Media formatting
Do not format (initialize) memory cards with
a computer. If you format a memory card
with a computer, devices such as digital
cameras and mobile phone may not be able to
use it due to differences in format type (FAT
size, cluster size, hard disk type, or super
floppy disk type). If you use a digital camera,
format memory cards with your camera,
instead.
Restrictions on DOS mode
In Windows, the reader/ writer does not
operate in DOS mode.
To use the reader/writer, start up Windows.
15
Standby
The reader/writer supports standby functions
based on the PC2000 standard, which may
not cover the standby function of all
computers. Disable the standby function of
your computer if it causes any problems.
While the computer is in standby, do not
insert or remove any media.
Do not attempt to dismantle, repair,
or alter the reader/writer yourself
Do not, under any circumstances, attempt to
dismantle, repair, or alter the reader/writer
yourself. You may not only permanently
damage the reader/writer and/or your
computer, but may also cause fire or personal
injury through electrical shock.
Operating and storage
environments
• Do not place the reader/writer close to heat
sources or in direct sunlight; in dusty, dirty,
or humid locations; under precipitation
such as rain; or leave it in a hot vehicle with
the windows closed.
• If the reader/writer interferes with the
reception of radio or television signals,
move the reader/writer away from the radio
or television.
• When using the reader/writer, do not wrap
it in cloth, sheets, or covers as this may
cause a malfunction or fire.
16
Troubleshooting
Before consulting your Sony representative, verify the following. If the problem still persists,
consult your local Sony dealer.
Problem
Solution
The computer does not detect
the reader/writer.
c
Your computer and the reader/writer may not be properly connected.
Disconnect the reader/writer from the computer and reconnect it.
The removable disk icon does c Your computer and the reader/writer may not be properly connected.
not appear.
See “Connecting the Reader/Writer to a Computer” (Page 7) and
make sure the connection is correct.
c In Windows 7 case, the removable disk icon appears after a memory
card inserted.
The memory card cannot be
accessed with Windows
Explorer or My Computer.
c No memory card is inserted. Insert a memory card into the proper
slot.
The computer does not
recognize the memory card.
c The memory card is not fully inserted. Insert the card completely.
c The memory card is not inserted straight. Remove the card and insert
it again.
The read/write speed is slow. c The speed may vary depending on the environment or the memory
card being used. This is not a malfunction.
17
Specifications
Technical Support
• For customers in Europe
USB transfer rate
Refer to “Sony at your service” of the
EUROPEAN GUARANTEE
INFORMATION DOCUMENT or check
on-line under
Full-speed (Up to 12 Mbps)
High-speed(Up to 480 Mbps)
This high-speed transfer rate is a theoretical
value for the USB standard.
Actual performance is dependent on the
device.
❑
Power requirements
4.75 V to 5.25 V DC
Current consumption
*
Max. 500 mA
Access indicator
Always lit
Blinks on access
Operating environment
Temperature: 5°C to 40°C
(41°F to 104°F)
Humidity: 30% to 80% RH
Storage environment
Temperature: –30 °C to + 60 °C
(–22 °F to +140 °F)
Humidity: No condensation
Dimensions (W × H × D)
Approx. 86 mm × 15.7 mm × 50 mm
(3 3/8 inches × 5/8 inches × 2 inches)
(excluding protrusions)
Mass
Approx. 57 g (2 oz.)
* Consumption may be higher when using
Microdrive
18
4. The User may not export or transport
the PROGRAM or documents
End User License
Agreement
accompanying the PROGRAM from
the country where the User installed
the PROGRAM to any other country.
IMPORTANT NOTICE
5. The User may not (i) update, add to, or
modify nor (ii) deassemble or de-
compile the PROGRAM either in
whole or in part.
The following “END USER LICENSE
AGREEMENT” applies to the Drive Letter
Recognition Software provided by Sony.
Please read the following “END USER
LICENSE AGREEMENT” before installing.
By installing the Drive Letter Recognition
Software, you agree to the “END USER
LICENSE AGREEMENT.”
6. THE PROGRAM IS PROVIDED “AS
IS” WITHOUT EXPRESS OR
IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF
MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE OR NON-
END USER LICENSE AGREEMENT
This is a legal agreement between you
(hereafter referred to as the User) and Sony
Corporation (hereafter referred to as Sony)
pertaining to the right to use the software
(hereafter referred to as the PROGRAM).
Using the PROGRAM indicates your
DEFECTIVENESS.
7. If any dispute relating to infringement of
copyright, patent, or other intangible
property rights arises between the User
and a third party as a consequence of use
of the PROGRAM, the User shall settle
the dispute at the User’s own expense,
and shall make no claim against Sony or
the original rightful person.
acceptance of these terms and conclusion of
the Agreement between the User and Sony.
1. Copyright and all other rights relating
to the PROGRAM and documents
accompanying the PROGRAM are
owned by Sony or the original rightful
person or organization (hereafter
referred to as the original rightful
person) granting Sony the right to use
the PROGRAM. The User is granted
no rights other than those specified in
this agreement.
8. Sony may terminate your license upon
notice for failure to comply with any of
these Terms. Any such termination
shall not affect any payments, any
compensation for damage. Upon
termination, you must immediately
destroy the Software together with all
copies in any form.
2. Sony grants the User the non-exclusive,
indivisible and nontransferable right to
use the PROGRAM for the purpose of
using the Sony product Multi-Card
Reader/Writer for which the
9. This Agreement has several non-
English language versions for the
reference purpose only. In the event of
any discrepancy between the English
language version and any other
language version, the English language
version shall prevail.
PROGRAM designates.
3. The User may not transfer the Right of
Use described above to any third party
nor allow for any third party to use the
PROGRAM unless the User obtains
the advance written permission of
Sony.
19
|