Riva Plus Fan Kits
Riva Small, Midi, Medium & Large
Installation & Users Instructions
For use in GB, IE (Great Britain and Eire)
This appliance has been certified for use in countries other than those stated. To install this appliance in these countries, it is essential to obtain the translated
instructions and in some cases the appliance will require modification. Contact Stovax for further information.
IMPORTANT
For use with 230v 50 - 60Hz electricity supply only.
Please read these instructions carefully and in conjunction with the appropriate Riva Installation and User instructions.
Care must be taken when handling the stove to avoid injury or damage to the stove.
They will be needed when maintenance or servicing is required.
THIS APPLIANCE MUST BE EARTHED
PM256 -Issue 1 (September 2008)
INSTALLATION INSTRUCTIONS
GENERAL
INSTALLATION
This fan system may be supplied in kit form and installed
in accordance with these instructions OR it may have
been factory fitted.
1
Velcro Pads
PACKING LIST
• Riva Plus Fan Kit
PR8179
TOOLS REQUIRED
• 10mm A/F Spanner
M6 Screws
POWER SUPPLy
PR8178
A 230v 50 - 60Hz supply is required.
1.1 • Position Fan kit as shown, diagram 1
THIS APPLIANCE MUST BE EARTHED
• Attach using M6 Nuts supplied
Provision for the power supply should be made before
installing the product, with connections made by a
qualified electrician via a 3 Amp supply and complying
with any local and national regulations and guidelines
• Secure control box in a convenient place using the self
adhesive Velcro pads supplied
• The appliance must be protect by a 3 amp fuse
• The electrical connection must allow for disconnection
• Use heat resistant cable
COMMISSIONING
1
If the electricity supply cable is damaged do not use the
appliance until it has been replaced. For safety reasons the
replacement should be carried out by a Stovax servicing
agent or a similarly competent electrician.
Live
wire
Brown
Terminal Marked L / coloured RED
Terminal Marked N / coloured
BLACK
Neutral
wire
Blue
3 way switch
Green and
yellow stripes
Earth
wire
Marked E /
GREEN & YELLOW
/ colour GREEN or
PR8179
Speed control
230v 50 - 60Hz supply is required
1. Check operation of fan kit
WARNING – FAILURE TO CONNECT THE WIRES CORRECTLy
COULD PUT PEOPLE AT RISK FROM ELECTRIC SHOCK OR
FIRE.
2. Explain the use of all the controls to the customer
3. Store these instructions with the ones supplied with the cassette
3
Stovax Ltd, Falcon Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7LF
|