All other names of systems, products, and services are trademarks of their
respective owners. In this manual, the ™ or ® marks are not specified.
If your computer is pre-installed with Windows XP, go
directly to the instructions in Case D.
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used
If your computer is pre-installed with Windows Vista, follow
these steps (In certain situations, you may be directed to the
instructions in Case B, Case C or Case D):
rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll
Caution: Do not handle damaged or leaking Lithium-Ion batteries.
Before Use
1
2
3
Click
(Start), then “Control Panel.”
This product is a laser mouse equipped with Bluetooth technology.
Bluetooth® Laser Mouse
VGP-BMS77
Click the “Hardware and Sound” icon.
It can be used with IBM PC/AT compatible computers pre-installed with
the Windows 7, Windows Vista or Windows XP (SP2 and after) operating
system and integrated built-in Bluetooth functionality (as of October 2009).
Depending on the personal computer or version of software you are using,
the mouse may not operate by function correctly.
If the “Bluetooth Devices” icon is in the “Hardware and
Sound” window:
Go to step 4.
For customers in other countries and regions
The equipment is classified as a CLASS 1 LASER PRODUCT and complies
with the Laser Products Safety Standard IEC 60825-1(2007)/EN 60825-1
(2007).
Caution - Repair and maintenance of this equipment should be made only
by Sony authorized technicians. Improper repairs and use can create safety
hazards.
Caution - Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
You can find the following sticker on the bottom of the equipment.
If the “Bluetooth Devices” icon is not visible in the
“Hardware and Sound” window:
Close the “Control Panel” and go to Case D.
Consult your nearest Sony dealer about proper operating environments and
information about Sony VAIO and Bluetooth compatibility.
Operating Instructions
Notes
4
5
Click the “Bluetooth Devices” icon, and verify the
contents of the window displayed.
Note
• Operation cannot be guaranteed for all computers meeting the above system
requirements.
• Operation is not guaranteed for home-built computers, whitebox PCs, and
computers with an upgraded OS or multiboot system environment.
4-123-465-13(1)
© 2008 Sony Corporation / Printed in Japan
If you switch to Classic View, double-click the “Bluetooth Devices” icon.
Review the Bluetooth Devices windows shown here.
If you see window 1, go to the instructions in Case B. If you see
window 2, go to the instructions in Case C.
English
Part Names
Window 1
WARNING
To prevent fire or shock hazard, do not expose the unit
to rain or moisture.
Forward button
Back button
For customers in Europe
Sony hereby declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Wheel button
To obtain a copy of the Declaration of Conformity (DoC) with the R&TTE
Directive, please access the following URL.
Warning: This apparatus must be earthed. (Except the products with a 2-pin
type plug.)
Right button
The equipment is classified as a CLASS 1 LASER PRODUCT and complies
with the Laser Products Safety Standard IEC 60825-1(2007)/EN 60825-1
(2007).
Caution - Repair and maintenance of this equipment should be made only
by Sony authorized technicians. Improper repairs and use can create safety
hazards.
Caution - Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
You can find the following sticker on the bottom of the equipment.
This AC adapter is intended for use with VAIO IT products only.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
Status light
Left button
Window 2
The battery pack used in this device may present a fire or chemical burn hazard
if mistreated. Do not disassemble, heat above 60 °C (140 °F) or incinerate.
Dispose of used batteries promptly and properly.
Power switch
CONNECT button
Keep away from children.
Do not short-circuit the metal terminals of the battery pack or wet them
with any liquid, for example, water, coffee, or juice.
Owner’s Record
The model number and the serial number are located inside the battery
compartment of the mouse. Record the serial number in the space provided below.
Refer to this number whenever you call your Sony dealer regarding this product.
Lens
Note
Model No. VGP-BMS77
Serial No.____________________
Do not open wireless devices, as opening them, for whatever reason, could
lead to damages that are not covered by the guarantee.
The laser light from the lens is invisible. When the mouse is turned on, the lens
part does not light up. This is not a malfunction.
For customers in the U.S.A.
The following FCC statement applies only to the version of this model
manufactured for sale in the USA.
In some situations or environments, the use of Bluetooth wireless technology
might be restricted by the proprietor of the building or responsible
representatives of the organization, for example onboard airplanes, in
hospitals or in any other environment where the risk of interference with
other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies to the use in a specific
organisation or environment, you are encouraged to ask for authorization
to use Bluetooth wireless technology prior to switching it on.
Case A
1
2
3
4
Click
(Start), then click “Devices and Printers.”
Other versions may not comply with FCC technical regulations.
Slide the power switch to the ON position.
Charging the Battery
Note
Charge the battery in an ambient temperature of between 5°C to 35 °C
(41°F to 95°F)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 and for an ISM equipment, pursuant to Part 18
of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Press the CONNECT button on the bottom of the mouse.
Click “Add a device” in the “Devices and Printers”
window.
Consult your physician or the manufacturer of personal medical devices
(pacemakers, hearing aids, etc.) regarding any restrictions on the use of
Bluetooth wireless technology.
1
Plug the AC adapter into the DC IN 5.2 V ! connector
on the Cradle 1, plug the power supply cord into the AC
adapter 2, plug into a proper electrical socket 3.
5
In the device list, select “VGP-BMS77,” and click “Next.”
z Hint
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural
If the “Select a pairing option” window is displayed, select “Pair
without using a code,” and click “Next.”
6
7
Click “Close” in the “Add a device” window.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Move the mouse. If the pointer displayed on your screen
moves appropriately, the connection is complete.
Case B
1
2
Slide the power switch to the ON position.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Press the CONNECT button on the bottom of the mouse.
The status light flashes green.
resources. For more detailed information about recycling of
this product, please contact your local Civic Office, your
household waste disposal service or the shop where you
purchased the product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
3
4
On the “Bluetooth Devices” window, click the “Add
Wireless Device” icon.
In the device list, select “VGP-BMS77,” and click “Next.”
Model No.: VGP-BMS77C (Cradle)
For questions regarding your product or for the Sony Service Center nearest you,
call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada.
Disposal of waste batteries (applicable in the European
Union and other European countries with separate
collection systems)
2
Put the mouse on the Cradle.
z Hint
If the “Select a pairing option” window is displayed, select “Pair
without using a code,” and click “Next.”
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical symbols
for mercury (Hg) or lead (Pb) are added if the battery
contains more than 0.0005% mercury or 0.004% lead.
The number below is for FCC related matters only.
5
6
7
On the “Pair with a Wireless Device” window, click “Close.”
Close the “Bluetooth Devices” window.
Declaration of Conformity
Trade Name:
Model No.:
SONY
VGP-BMS77C
Move the mouse. If the pointer displayed on your screen
moves appropriately, the connection is complete.
Responsible Party:
Address:
Telephone No.:
Sony Electronics Inc.
16530 Via Esprillo, San Diego, CA 92127 U.S.A.
858-942-2230
By ensuring these batteries are disposed of correctly, you
will help prevent potentially negative consequences for the
environment and human health which could otherwise be caused by
inappropriate waste handling of the battery. The recycling of the materials will
help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require
a permanent connection with an incorporated battery, this battery should be
replaced by qualified service staff only.
To ensure that the battery will be treated properly, hand over the product at end-
of-life to the applicable collection point for the recycling of electrical and
electronic equipment.
For all other batteries, please view the section on how to remove the battery from
the product safely.
Case C
1
2
This device complies with Part 18 of the FCC Rules.
Slide the power switch to the ON position.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
On the “Bluetooth Devices” window, select the
“Devices” tab and click “Add.”
The “Add Bluetooth Device Wizard” appears.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of the device.
3
4
Press the CONNECT button on the bottom of the mouse.
The status light flashes green.
For customers in the U.S.A. and Canada
When charging starts, the status light lights up orange. The status light
turns off when charging is complete.
Select the “My device is set up and ready to be found”
check box and click “Next.”
This equipment complies with FCC/IC radiation exposure limits set forth
for uncontrolled equipment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC
radio frequency (RF) Exposure rules. This equipment has very low levels of
RF energy that it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it should be installed and
operated with at least 20cm and more between the radiator and person’s
body (excluding extremities: hands, wrists, feet and ankles).
5
6
7
8
9
In the device list, select “VGP-BMS77,” and click “Next.”
Select “Don’t use a passkey” and click “Next.”
Click “Finish.”
Hand the battery over to the applicable collection point for the recycling of waste
batteries. For more detailed information about recycling of this product or
battery, please contact your local Civic Office, your household waste disposal
service or the shop where you purchased the product.
About charging time
• When the status light flashes orange, the mouse built-in battery power is
low and needs to be charged.
• If the mouse is sufficiently charged when placed on the Cradle, the status
light will light up orange for 3 seconds and then turn off.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-
ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and
product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters please refer to the
addresses given in separate service or guarantee documents.
Click “OK.”
This device and its antenna(s) must not be co-located or operating with any
other antenna or transmitter except Grant condition.
Move the mouse. If the pointer displayed on your screen
moves appropriately, the connection is complete.
The equipment is classified as a CLASS 1 LASER PRODUCT and complies
with the Laser Products Safety Standard IEC 60825-1(2007)/EN 60825-1(2007).
Caution - Repair and maintenance of this equipment should be made only
by Sony authorized technicians. Improper repairs and use can create safety
hazards.
Caution - Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
You can find the following sticker on the bottom of equipment.
Enabling Communication
between the Mouse and Your
Personal Computer
Case D
1
2
Trademarks and notice
VAIO is a trademark of Sony Corporation.
Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
IBM and PC/AT are registered trademarks of International Business Machines
Corporation.
Slide the power switch to the ON position.
Double-click
in the notification area in the bottom
right corner of your personal computer’s desktop.
The “Bluetooth Settings” screen appears.
Use the Bluetooth software installed on your personal computer to enable
communication between the mouse and your personal computer.
3
4
5
Click “New Connection.”
The “Add New Connection Wizard” screen appears.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and
any use of such marks by Sony Corporation is under license.
Note
Activate the Bluetooth software on your personal computer. Operation of the
Bluetooth software may vary depending on your personal computer.
For details, refer to the manuals provided with your personal computer.
Press the CONNECT button on the bottom of the mouse.
The status light flashes green.
Other trademarks and Trade names are those of their respective owners.
In this manual, Microsoft® Windows® XP Home Edition and Microsoft®
Windows® XP Professional are referred to as Windows XP.
Select “Express Mode” and click “Next.”
The search for Bluetooth devices begins.
In this manual, Microsoft® Windows Vista® Home Basic, Microsoft® Windows
Vista® Home Premium, Microsoft® Windows Vista® Business and Microsoft®
Windows Vista® Ultimate are referred to as Windows Vista.
The setup instructions are based on your operating system.
If your computer is pre-installed with Windows 7, go directly
to the instructions in Case A.
6
7
In the device list, select “VGP-BMS77,” and click “Next.”
In this manual, Microsoft® Windows® 7 Ultimate, Microsoft® Windows®
7
If the “Add New Connection Wizard” disappears,
connection is complete. Go to step 10.
Professional, Microsoft® Windows® 7 Home Premium, Microsoft® Windows®
Home Basic or Microsoft® Windows® 7 Starter are referred to as Windows 7.
7
Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil
based ink.
|