4-400-834-31(1)
CD/DVD Player
Reference Guide
DVP-SR510H
© 2012 Sony Corporation
apparatus combination to avoid
injury from tip-over.
• MPEG Layer-3 audio coding
technology and patents licensed
from Fraunhofer IIS and
Thomson.
• Windows Media is either a
registered trademark or
trademark of Microsoft
Corporation in the United States
and/or other countries.
13)Unplug this apparatus during
lightning storms or when
unused for long periods of
time.
This product contains
technology subject to certain
intellectual property rights of
Microsoft.
Use or distribution of this
technology outside of this
product is prohibited without the
appropriate license(s) from
Microsoft.
• This DVD player incorporates
High-Definition Multimedia
Interface (HDMI™) technology.
HDMI, the HDMI Logo, and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC in the United
States and other countries.
• This product meets ENERGY
STAR® guidelines for energy
efficiency.
14)Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed to
rain or moisture, does not
operate normally, or has been
dropped.
Note about the discs
Do not use the following discs:
– A disc recorded in a color system
other than NTSC, such as PAL or
SECAM (this player conforms to
the NTSC color system).
ENERGY STAR and the
ENERGY STAR mark are
registered U.S. marks.
ENERGY STAR is a registered
mark owned by the U.S.
government.
– A disc that has a non-standard
shape (e.g., card, heart).
– A disc with a label or sticker on
it.
Region code
About this manual
Your player has a region code
printed on the back of the unit and
only will play commercial DVDs
(playback only) labeled with
“DVD” may be used as a general
term for commercial DVDs,
DVD+RWs/DVD+Rs/DVD+R
DLs (+VR mode) and DVD-RWs/
DVD-Rs/DVD-R DLs (VR mode,
video mode).
identical region codes. This system
is used to protect copyrights.
ALL
Commercial DVDs labeled
will also play on this player.
Depending on the commercial
DVD, there may be no region code
indication, even though playing the
commercial DVD is prohibited by
area restrictions.
DVP–XXXX
X
Region code
00V 00Hz
NO.
00W
0-000-000-00
Copyrights and trademarks
• Manufactured under license
from Dolby Laboratories. Dolby
and the double-D symbol are
trademarks of Dolby
Laboratories.
• “DVD Logo” is a trademark of
DVD Format/Logo Licensing
Corporation.
3
Menu list
Playback
Item
Item Name, Function
TITLE/SCENE/TRACK
CHAPTER/INDEX
TRACK
Control Menu display
Use the Control Menu to select a function and
to view related information.
Selects the title, scene, track, chapter, or index
to be played.
Press DISPLAY.
To change the Control Menu display, press
DISPLAY again.
TIME/TEXT
Checks the elapsed time and the remaining
playback time.
Input the time code for picture and music search
(DVD only).
(
)
)
1 2 2 7
DVD VIDEO
(
1 8 3 4
T
1 : 3 2 : 5 5
TOP MENU/MENU
OFF
OFF
SET
ON
(DVD VIDEO only)
TOP MENU: Displays the top menu.
MENU: Displays the menu.
ORIGINAL/PLAY LIST
PROGRAM
ENTER
DISPLAY
Quit:
Selects the type of title (DVD-VR mode) to be
played: ORIGINAL, or edited PLAY LIST.
1,
2
PROGRAM*
*
A Control Menu items
Selects the title, chapter, or track to play in the
order you want.
B Currently playing title/Total number of
1 Select “SET t,” then press ENTER and
select the title (T), chapter (C), or track (T)
you want to program, and press ENTER.
titles
C Currently playing chapter/Total number
of chapters
2 Repeat selecting the title, chapter, or track.
D Playing time
3 Press N.
1,
2
E Selected media type
F Playback status
SHUFFLE*
*
Plays the title, chapter, or track in random order.
G Selected item icon/menu options
H Operation message
I Selected Control Menu item
1,
2
REPEAT*
*
Plays all titles/tracks/albums or a single title/
chapter/track/album/file repeatedly.
1,
2
A-B REPEAT*
*
Specifies the parts you want to play repeatedly.
1 During playback, select “SET t,” then
press ENTER.
The “A-B REPEAT” setting bar appears.
2 When you find the starting point (point A),
press ENTER.
3 When you reach the ending point (point B),
press ENTER again.
4
PARENTAL CONTROL
CUSTOM PICTURE MODE
Set to prohibit playback on this player.
PLAYER t: Playback of some DVD VIDEOs
can be limited according to a predetermined
level such as the age of the users. Scenes may be
blocked or replaced with different scenes
(Parental Control).
Selects the picture quality that best suits the
program you are watching.
STANDARD: Displays a standard picture.
DYNAMIC: Produces a bold dynamic picture
by increasing the picture contrast and the color
intensity.
PASSWORD t: Enter a 4-digit password
using the number buttons. Also use this menu to
change the password.
CINEMA: Enhances details in dark areas by
increasing the black level.
MEMORY t: Adjusts the picture in greater
detail.
Parental Control (limited playback)
You can set a playback limitation level.
SHARPNESS
Exaggerates the outline of the image to produce
a sharper picture.
OFF: Cancels this option.
1: Enhances the outline.
2: Enhances the outline more than 1.
1 Select “PLAYER t,” then press ENTER.
Enter or re-enter your 4-digit password, then
press ENTER.
2 Press X/x to select “STANDARD,” then
press ENTER.
Press X/x to select an area, then press
AV SYNC
ENTER.
Adjust the delay between the picture and sound.
This function is not effective when:
– you use the DIGITAL OUT (COAXIAL)
jack, and set “DOLBY DIGITAL” and “DTS”
in “AUDIO SETUP” to “DOLBY DIGITAL”
– you connect a Dolby Digital or DTS-
compliant device via the HDMI OUT jack,
and set “DOLBY DIGITAL” and “DTS” in
“AUDIO SETUP” to “DOLBY DIGITAL”
When you select “OTHERS t,” select and
enter a standard code. See “PARENTAL
CONTROL AREA CODE LIST” at the end
of this manual.
3 Press X/x to select “LEVEL,” then press
ENTER.
Press X/x to select the level, then press
ENTER.
Parental Control setting is complete.
The lower the value, the stricter the
limitation.
To turn off the Parental Control function, set
“LEVEL” to “OFF.”
1 Select “SET t,” then press ENTER.
The “AV SYNC” adjustment bar appears.
2 Press c repeatedly to adjust the delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
If you forget your password, enter “199703” in
the password box, press ENTER, and then enter
a new 4-digit password.
3 Press ENTER.
SETUP
The selected setting takes effect.
To reset the “AV SYNC” setting, press CLEAR
in step 2.
QUICK: Use Quick Setup to choose the desired
language of the on-screen display, the aspect
ratio of the TV and the audio output signal.
1
*
To return to normal play, select “OFF” or press
CLEAR.
The play mode is canceled when:
– you open the disc tray.
CUSTOM: In addition to the Quick Setup
setting, you can adjust various other settings
2
*
RESET: Returns the settings in “SETUP” to the
– you turn off the player.
default setting.
1
ZOOM*
Magnifies the image up to four times the
original size, scroll using C/X/x/c.
ANGLE
Changes the angle.
,continued
5
◆Items for DATA files
Item Item Name, Function
ALBUM
The player automatically returns
to standby mode
If any button on the player or remote is not
pressed for more than 25 minutes, the player
automatically returns to standby mode.
Selects the album that contains music and photo
files to be played.
FILE
To play VIDEO CDs with PBC
functions
Selects the photo file to be played.
ALBUM
When you start playing a VIDEO CD with
PBC (Playback control) functions, the menu
for your selection appears.
Selects the album that contains the video file to
be played.
FILE
To play without using PBC
Selects the video file to be played.
DATE
Press ./> or the number buttons while
the player is stopped to select a track, then
press N or ENTER. To return to PBC
playback, press x twice, then press N.
Displays the date the picture was taken by a
digital camera.
INTERVAL*
Controlling TVs with the remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
When you replace the batteries of the remote,
set the appropriate code number again.
Specifies the duration for which the slides are
displayed on the screen.
EFFECT*
Selects the effects to be used for changing slides
during a slide show.
MODE 1: The images randomly cycle through
the effects.
MODE 2: The image sweeps in from top left to
bottom right.
MODE 3: The image sweeps in from top to
bottom.
1 While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code.
2 Release TV [/1.
MODE 4: The image sweeps in from left to right.
MODE 5: The image stretches out from the
center of the screen.
Code numbers of controllable TVs
Sony
Hitachi
01 (default)
02
OFF: Turns off this function.
LG/Goldstar/NEC 04
MGA/Mitsubishi 13
MEDIA
Selects the media type you want to play.
VIDEO: Plays video files.
Panasonic
Philips
Pioneer
RCA
19
21
16
10
20
18
07
PHOTO (MUSIC): Plays photo and music
files as a slide show. You can view a slide show
with sound when music and photo files are
placed in the same album. If the playing time of
either music or photos is longer, the longer one
continues without sound or image.
Samsung
Sharp
Toshiba
PHOTO: Plays photo files.
MUSIC: Plays music files. Press SUBTITLE
while playing music files that contain
unsynchronized lyric information. The player
supports MP3 ID3 Lyrics only.
* Depending on the file, this function may not be
possible.
6
SCREEN SETUP
Viewing a high quality slide
show (PhotoTV HD)
TV TYPE: Selects the aspect ratio of the
connected TV.
If you have a Sony TV that is compatible with
“PhotoTV HD,” you can enjoy the best
quality images. “PhotoTV HD” is activated
when the player is connected to a TV by an
HDMI cord and “JPEG RESOLUTION” in
“HDMI SETUP” is set to “PhotoTV HD”
(page 8).
16:9
4:3 LETTER BOX
4:3 PAN SCAN
CUSTOM Menu
You can adjust various settings.
Press DISPLAY when the player is in stop
SCREEN SAVER: When set to “ON,” the
screen saver appears when the player is in pause
or stop mode for 15 minutes. Press N to turn
off the screen saver.
mode, select
(SETUP), and then
select “CUSTOM.” The CUSTOM menu
appears.
BACKGROUND: Selects the background
color or picture on the TV screen. If you set
“JACKET PICTURE,” even though the disc
does not contain a jacket picture, the
“GRAPHICS” picture appears.
BLACK LEVEL: Selects the black level (setup
level) for video signals output from the jacks
other than HDMI OUT.
MODE (PROGRESSIVE): If you select
“AUTO,” the player detects the format (film-
based or video-based), and converts to the
appropriate version.
4:3 OUTPUT: This setting is effective only
when you set “TV TYPE” to “16:9.” Select
“FULL” when you can change the aspect ratio
on your TV.
Menu list
Item
Item Name, Function
LANGUAGE SETUP
OSD (On-Screen Display): Switches the
display language on the screen.
1
MENU* : Selects the desired language for the
disc’s menu. (DVD VIDEO only)
1
AUDIO* : Switches the language of the sound
track. When you select “ORIGINAL,” the
language given priority in the disc is selected.
(DVD VIDEO only)
1
SUBTITLE* : Switches the language of the
subtitle recorded on the DVD VIDEO. When
you select “AUDIO FOLLOW,” the language
for the subtitles changes according to the
language you selected for the sound track.
(DVD VIDEO only)
CUSTOM SETUP
AUTO PLAY: When set to “ON,” the player
automatically starts playback when the player is
turned on by a timer (not supplied).
PAUSE MODE: Selects the picture in pause
mode. Normally select “AUTO.” When the
picture is output in high resolution, set to
“FRAME.” (DVD only)
TRACK SELECTION: Gives the sound track
which contains the highest number of channels
priority when you play a DVD VIDEO on
which multiple audio formats (PCM, DTS, or
Dolby Digital format) are recorded. If you
select “AUTO,” priority is given. (DVD
VIDEO only)
IMAGE QUALITY: Selects the priority
display to either high quality image or quick
speed. (Photo files only)
,continued
7
MULTI-DISC RESUME: Switches the Multi-
disc Resume setting on or off. Resume playback
can be stored in memory for up to 6 different
DVD VIDEOs/VIDEO CDs. If you start the
settings again, the resume point is cleared.
(DVD VIDEO/VIDEO CD only)
JPEG RESOLUTION: Selects the type of
JPEG resolution so that you can enjoy a high
picture quality via HDMI connection.
This setting is effective only when you set “TV
TYPE” to “16:9.” You cannot select this when
“HDMI RESOLUTION” is set to “720×480p.”
“(1920×1080i) HD
” and “(1920×1080i)
AUDIO SETUP
HD” are effective only when you set “HDMI
RESOLUTION” to “1920×1080i.” If you set
this setting to “PhotoTV HD,” “(1920×1080i)
2
AUDIO DRC (Dynamic Range Control)* :
Set according the surrounding environment. Set
to “TV MODE” when the smallest sounds are
indiscernible, or set to “WIDE RANGE” when
the listening environment is good, for example,
in a home movie theater.
HD
” or “(1920×1080i) HD,” the effect,
rotation, and zoom functions are not available.
YCBCR/RGB (HDMI): Selects the type of
HDMI signal output from the HDMI OUT jack.
Set to “RGB” if the playback picture is
distorted. You cannot select this when “JPEG
RESOLUTION” is set to “PhotoTV HD.”
AUDIO (HDMI): Selects the type of audio
signal output from the HDMI OUT jack. Set to
“PCM” if you connect the player to a TV that is
not compatible with DOLBY DIGITAL/DTS
signals.
2
DOWNMIX* : Switches the method for
mixing down to 2 channels when you play a
DVD which has rear sound elements (channels),
or is recorded in Dolby Digital format.
Normally select “DOLBY SURROUND.”
DIGITAL OUT: Selects if audio signals are
output via the DIGITAL OUT (COAXIAL)/
HDMI OUT jack. When you select “ON,” set
also the following “DOLBY DIGITAL,”
“DTS,” or “48kHz/96kHz PCM.”
DOLBY DIGITAL: Selects the type of Dolby
Digital signal. Set to “D-PCM” when the player
is connected to an audio component without a
built-in Dolby Digital decoder.
DTS: Selects the type of DTS audio signal. Set
to “ON” when you play a DVD VIDEO with
DTS sound tracks. Do not set to “ON” when
you connect the player to an audio component
without a DTS decoder.
48kHz/96kHz PCM: Selects the sampling
frequency of the digital audio output signal.
(DVD VIDEO only)
1
*
When you select “OTHERS t,” select and
enter a language code. See “LANGUAGE
CODE LIST” at the end of this manual.
This function affects the output from the
following jacks:
2
*
– LINE OUT L/R (AUDIO) jacks.
– DIGITAL OUT (COAXIAL)/HDMI OUT
jack only when “DOLBY DIGITAL” is set to
“D-PCM.”
If the picture does not appear normally or goes
blank, reset the setting. Press [/1 to turn off,
enter “369,” and then press [/1 to turn on the
player again.
3
*
HDMI SETUP
You can adjust items related to HDMI
connection.
3
HDMI RESOLUTION* : Selects the type of
video signal output from the HDMI OUT jack.
If “AUTO (1920×1080p)” (default) is selected,
the player outputs video signals of the highest
resolution acceptable for your TV. If the picture
is not clear, unnatural or otherwise not to your
satisfaction, try another option that suits the
disc, TV/projector, etc. For details, refer also to
the instruction manual supplied with the TV/
projector, etc.
You cannot select this when “JPEG
RESOLUTION” is set to “PhotoTV HD.”
8
The player does not operate properly.
c When static electricity, etc., causes the player
to operate abnormally, unplug the player.
Information
“C:13:**” appears on the screen.
c Clean the disc with a cleaning cloth or check
its format.
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
There is no picture/sound when connected
to the HDMI OUT jack.
c Change the “HDMI RESOLUTION” setting
in “HDMI SETUP.” The problem may be
solved.
The power is not turned on.
c Check that the power cord is connected
securely.
c The equipment connected to the HDMI OUT
jack does not conform to the audio signal
format, in this case set “AUDIO (HDMI)” in
“HDMI SETUP” to “PCM.”
There is no picture/picture noise appears.
c Re-connect the connecting cord securely.
c The connecting cords are damaged.
c Check the connection to your TV and switch
the input selector on your TV so that the signal
from the player appears on the TV screen.
c The disc is dirty or flawed.
c Try the following: 1Turn the player off and
on again. 2Turn the connected equipment off
and on again. 3Disconnect and then connect
the HDMI cord again.
Playable file format
c Press [/1 to turn off the player, and enter
“369” using the number buttons on the remote,
then press [/1 to turn on the player again.
Video: MPEG-1 (Cyber-shot data)
Photo: JPEG (DCF format)
Music: MP3 (except for mp3PRO)/WMA
1,
2
1,
2
(except for WMA Pro)* * /AAC* * /
There is no sound.
LPCM/WAVE
c Re-connect the connecting cord securely.
c The connecting cord is damaged.
c The player is in pause mode or in Slow-motion
Play mode.
1
*
Files with copyright protection (Digital Right
Management) cannot be played.
The player does not play coded files such as
Lossless.
2
*
c The player is in fast forward or fast reverse
mode.
Supported extensions: “.mpg”, “.mpeg”,
“.jpg”, “.mp3”, “.wma”, “.m4a”, “.wav”
Supported discs: DVD, DVD RW/ R/ R
DL, Music CD/Super VCD, CD-R/-RW
The remote does not function.
c The batteries in the remote are weak.
c The remote is not pointed at the remote sensor
on the player.
c When you operate the player by pressing
buttons on the remote in sequence, press the
buttons within 5 seconds of each other.
• DATA CDs recorded according to ISO
9660 Level 1/Level 2, or its extended
format, Joliet.
• DATA DVDs recorded according to UDF.
• The player will play any file in the above,
even if the file format differs. Playing such
data may generate noise that can result in
speaker damage.
• To play a complex hierarchy of folders may
take some time. Create albums with no
more than two hierarchies.
• Some video, photo, and music files may not
play, depending on the encoding/recording
condition.
The disc does not play.
c The disc is turned over.
Insert the disc with the playback side facing
down.
c The disc is skewed.
c The player cannot play certain discs.
c The region code on the DVD does not match
the player.
c Moisture has condensed inside the player.
c The player cannot play a recorded disc that is
not correctly finalized.
• To start playback and proceed to the next or
another album/file may take some time.
,continued
9
• The player will recognize a maximum of
200 albums and 600 files. It can recognize
up to 300 music files and 300 photo files
when “PHOTO (MUSIC)” is selected.
• The player may not play a combination of
two or more video files.
• The player cannot play a video file of size
more than 720 (width) × 576 (height)/2 GB.
• Depending on the file, playback may not be
smooth. You are recommended to create the
file at a lower bit rate.
Specifications
System
Laser: Semiconductor laser
Inputs/Outputs
• LINE OUT L/R (AUDIO): Phono jack
• DIGITAL OUT (COAXIAL): Phono jack
• LINE OUT (VIDEO): Phono jack
• HDMI OUT: HDMI 19 pin-Standard
Connector
• The player may not play back the high bit
rate video file on the DATA CD smoothly.
You are recommended to play back using
DATA DVD.
General
• Power requirements: 120 V AC, 60 Hz
• Power consumption: 6 W
Note about recordable media
• Dimensions (approx.): 270 × 38.5 × 209
mm (105/8 × 11/2 × 81/4 in.) (width/height/
depth) incl. projecting parts
• Mass (approx.): 950 g (2 lb 2 oz)
• Operating temperature: 5 °C to 35 °C
(41 °F to 95 °F)
Some recordable media cannot be played on
this player due to the recording quality or
physical condition of the disc, or the
characteristics of the recording device and
authoring software. The disc will not play if it
has not been correctly finalized. Also some
DATA discs created in Packet Write format
cannot be played.
• Operating humidity: 25% to 80%
Supplied accessories
• Audio/Video cord (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
For player that cannot play images that
contain a copy protection only
Images in DVD-VR mode with CPRM
(Content Protection for Recordable Media)
protection may not be played.
Specifications and design are subject to
change without notice.
Note on playback operations of DVDs and
VIDEO CDs
Some playback operations of DVDs and
VIDEO CDs may be intentionally set by
software producers. Since this player plays
DVDs and VIDEO CDs according to the disc
contents the software producers designed,
some playback features may not be available.
Also, refer to the operating instructions
supplied with the DVDs or VIDEO CDs.
Note on discs
This unit is designed to playback discs that
conform to the Compact Disc (CD) standard.
DualDiscs and some music discs encoded
with copyright protection technologies do not
conform to the Compact Disc (CD) standard.
Therefore, these discs may not be compatible
with this unit.
10
LANGUAGE CODE LIST
1 page 7
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1358 Maltese
1363 Burmese
1365 Nauru
1369 Nepali
1376 Dutch
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto;
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1525 Telugu
1527 Tajik
1528 Thai
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian;
Lettish
1171 Faroese
1174 French
1181 Frisian
1503 Singhalese
1505 Slovak
1506 Slovenian
1345 Malagasy
1703 Not specified
ISO 639: 1988 (E/F) standard
PARENTAL CONTROL AREA CODE LIST
1 page 5
Code Area
Code Area
Code Area
Code Area
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2079 Canada
2090 Chile
2165 Finland
2174 France
2109 Germany
2248 India
2238 Indonesia
2254 Italy
2276 Japan
2304 Korea
2363 Malaysia
2362 Mexico
2149 Spain
2376 Netherlands
2390 New Zealand
2379 Norway
2499 Sweden
2086 Switzerland
2528 Thailand
2184 United
Kingdom
2427 Pakistan
2424 Philippines
2436 Portugal
2489 Russia
2092 China
2115 Denmark
2501 Singapore
4-400-834-31(1)
Printed in China
|