Disposal of waste batteries
Music discs encoded with copyright
3-878-117-11(1)
(applicable in the European Union
and other European countries with
separate collection systems)
Basic Operations
protection technologies
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
Listening to music of a USB device
is symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste. By ensuring these batteries
are disposed of correctly, you will help prevent potentially
negative consequences for the environment and human
health which could otherwise be caused by inappropriate
waste handling of the battery. e recycling of the
materials will help to conserve natural resources.
You can listen to music stored on an optional USB device
(digital music player or USB storage media).
Music files in WMA and MP3 format* can be played on
this unit.
Personal Audio System
See “Playable USB devices” on the back page for a list of
USB devices that can be connected to this unit.
* Files with copyright protection (Digital Rights Management) cannot
be played on this unit.
1
2
Press USB
on the unit.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only.
To ensure that the battery will be treated properly, hand
over the product at end-of-life to the applicable collection
point for the recycling of electrical and electronic
equipment.
Connect the USB device to the
“Connecting a USB device”).
“USB MEMORY” appears in the display.
(USB) port
(See
.
3
Press
e unit starts playing.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
GB
Operating Instructions
ZS-PS20CP
* VOLUME + (VOL + on the remote)
a tactile dot.
and
on the unit have
File number
After the file name is displayed, the
playing time will appear
Press VOLUME + or – (or VOL + or – on the remote)
©2008 Sony Corporation Printed in China
Tips
4
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
Playback starts from the track/MP3/WMA file you last stopped
to adjust the volume.
Before using the unit
Listening to the radio
playing (Resume play). During stop, the track/MP3/WMA file
number to be played is displayed.
Other operations
1
Press RADIO
on the unit (BAND
on the
To cancel resume play (to start play from the beginning of the first
Excessive sound pressure from earphones and
headphones can cause hearing loss.
About the operating voltage
remote) repeatedly.
To
Press
track/MP3/WMA file), press
stop mode.
or open the CD compartment in
WARNING
e unit’s operating voltage is shown on the bottom of
the unit. For changing the AM tuning interval, radio
frequency range, and AC operation, check the operating
voltage of your unit.
Each time you press the button, the indication changes
Pause playback
. To resume play, press the
Notice for customers: the following
information is only applicable
to equipment sold in countries
as follows:
“FM” “AM”.
button again*.
Note
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
You cannot locate a specific track/MP3/WMA file if “SHUF” or
“PGM” is lit in the display. Turn off the indication by pressing MODE
Stop playback
Select a folder
Select a file
Find a point in a
file
.
2
Hold down TUNE + or –
until the frequency digits
begin to change in the display.
.
.
+ or –
Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
applying EU Directives
To turn on/off the power
or
.
e manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, Japan.
e unit automatically scans the radio frequencies and
stops when it finds a clear station.
If you cannot tune in a station, press TUNE + or –
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST”
appears.
.
Press OPERATE
Example of folder structure and playing order
e playing order of folders and files is as follows:
To reduce the risk of electrical shock, do
not open the cabinet. Refer servicing to
qualified personnel only.
Hold down
or
during
e Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany. For any service or
guarantee matters please refer to the addresses given in
separate service or guarantee documents.
playback, and release the button at
To adjust the volume
Press VOLUME +, – (VOL +, – on the remote)
the desired point.
.
Folder
Select Repeat Play REPEAT
on the unit repeatedly
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
MP3/WMA file
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To listen through headphones
Connect the headphones to the (headphones) jack
until “ ” or “ 1” appears.
.
Remove the USB
device
Hold down
until “NO DEV”
Tip
If the FM broadcast is noisy, press MODE
in the display and the radio will play in monaural.
until “MONO” appears
appears, then remove the USB
Notes on DualDiscs
To reinforce the bass sound
To reduce the risk of fire or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects filled with liquids, such as vases, on the apparatus.
device.
A DualDisc is a two sided disc product which mates DVD
recorded material on one side with digital audio material
on the other side. However, since the audio material side
does not conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
Press MEGA BASS
on the unit.
* When playing a VBR MP3 file, the unit may resume playback from a
different point.
“MEGA BASS” appears in the display.
To return to normal sound, press the button again.
As the main plug is used to disconnect the unit from the
mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
Tips
Changing the AM tuning interval
If you need to change the AM tuning interval, do the
following:
Playback starts from the MP3/WMA file you last stopped playing
(Resume play). During stop, the MP3/WMA file number and the
playing time to be played are displayed.
To cancel resume play (to start play from the beginning of the first
MP3/WMA file), press
Playing a CD/MP3/WMA disc
1
2
3
Press RADIO
on the unit until “AM”is displayed.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
.
1
Press CD
on the unit.
Press DISPLAY/ENTER
on the unit for 2 seconds.
on the unit for 2 seconds.
“9k STEP” or “10k STEP” flashes.
on the unit to select “9k
STEP”for 9 kHz interval or “10k STEP”for 10 kHz
interval.
(On the remote, press OPERATE
and then press
Note
Always hold down
and make sure that “NO DEV” appears
Applicable accessories: Remote control
Press RADIO
Do not expose the batteries (battery pack or batteries
installed) to excessive heat such as sunshine, fire or the
like for a long time.
FUNCTION
display.)
repeatedly until “CD” appears in the
before removing the USB device. Removing the USB device while
“NO DEV” is not displayed may corrupt the data on the USB device
or damage the USB device itself.
4
5
Press PRESET + or –
2
Press PUSH OPEN/CLOSE
on the unit, and
place a disc with the label side up in the CD
compartment.
To change the play mode
Press MODE
repeatedly while the USB device is not
To close the CD compartment, press PUSH OPEN/
on the unit.
Aſter changing the tuning interval, you need to reset
your preset AM radio stations.
Power sources
Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Press DISPLAY/ENTER
playing. You can select Normal Play (all files on the USB
device (or in the selected folder while “ ” lights up) one
aſter another), Shuffle Play (“SHUF” or “ SHUF”), or
Program Play (“PGM”).
CLOSE
on the unit.
Battery life
For player:
FM reception
Sony R14P: approx. 13.5 h
Sony alkaline LR14: approx. 20 h
CD playback
Notes on the USB device
You cannot change the play mode during playback.
Some time may be needed before playback starts when:
– the folder structure is complex.
– the USB device is close to capacity.
When a USB device is connected, the unit reads all the files on the
device. If there are many folders or files on the device, it may take a
long time for the unit to finish reading them.
Do not connect a USB device to the unit through a USB hub.
For some USB devices, when an operation is performed on the USB
device, there may be a delay before it is carried out on this unit.
is unit may not support all the functions provided on the
connected USB device.
e playback order on this unit may differ from the playback order
on the connected USB device.
During playback, folders that contain no MP3/WMA files are
skipped.
is unit can play MP3 and WMA files that have the “.mp3” or
“.wma” file extension.
If there are files on the disc that have the “.mp3” or “.wma” file
extension, but are not MP3/WMA files, the unit may produce noise
or malfunction.
A maximum of 999 MP3/WMA files and 255 folders can be
contained on a single USB device.
e maximum number of MP3/WMA files and folders may vary,
depending on the file and folder structure.
Compatibility with all MP3/WMA encoding/writing soſtware,
recording devices, and recording media cannot be guaranteed. If you
use an incompatible USB device, sound skipping or noise may be
produced, or the device may not play at all.
Emission duration: Continuous
Laser output: Less than 44.6 µW
(is output is the value measurement at a distance of
200mm from the objective lens surface on the
Optical Pick-up Block with 7mm aperture.)
Spindle speed
Notes on MP3/WMA discs
Opening/closing the Sliding Tray
Connecting a USB device
When a disc is inserted, the unit reads all the files on that disc.
During this time, “READING” is displayed. If there are many folders
or non-MP3/WMA files on the disc, it may take a long time for play
to begin or for the next MP3/WMA file to start play.
Do not save unnecessary folders or files other than MP3/WMA ones
on a disc to be used for MP3/WMA listening.
A folder that does not include an MP3/WMA file is skipped.
Maximum number of files: 511
Maximum number of folders: 150
Maximum directory steps: 8
Sony R14P: approx. 2.5 h
Sony alkaline LR14: approx. 7 h
.
1
Press
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
Dimensions
Approx. 360 × 142 × 234 mm (w/h/d)
e Sliding Tray
is ejected.
Connect your USB device to the
.
3
Press
2
(14 1
Mass
/
4 × 5 5 8 × 9 1
/ /4 inches) (incl. projecting parts)
Frequency response
.
2
(USB) port
e unit plays all the tracks/MP3/WMA files once.
When you place MP3/WMA discs, “MP3” or “WMA”
appears in the display aſter the unit reads the file
information.
20 - 20 000 Hz +1/–2 dB
Wow and flutter
Approx. 2.8 kg (6 lb 2 oz) (incl. batteries)
Supplied accessories
1
to AC IN
2
to the wall outlet
Below measurable limit
AC power cord (1)
Remote control (1)
Folder names and file names can be displayed with up to 32
characters.
e characters A - Z, a - z, 0 - 9, and _ can be displayed on this unit.
Other characters are displayed as “_”.
is unit conforms to Version 1.1 of the ID3 tag format. If the file
has the ID3 tag information, “song title”, “artist name”, and “album
name” can be displayed.
Radio section
Frequency range
Audio CD
Connect the AC power cord
or insert six R14 (size C) batteries (not supplied) into the battery compartment
.
Design and specifications are subject to change without notice.
FM: 87.5 - 108 MHz
AM: 531 - 1 611 kHz (9 kHz step)
530 - 1 610 kHz (10 kHz step)
Notes
Optional accessories
Sony MDR headphones series
Replace the batteries when the OPR/BATT
indicator dims or when the unit stops operating.
Replace all the batteries with new ones. Before you replace the batteires, be sure to remove the CD from the unit.
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
When naming, be sure to add the file extension “.mp3” or “.wma” to
the file name.
To use the unit on battery power, disconnect the AC power cord from the unit.
Track number
Playing time
Tip
If you put the extension “.mp3” or “.wma” to a file other than an
MP3/WMA file, the unit cannot recognize the file properly and will
generate random noise that could damage your speakers.
e file name does not correspond to the ID3 tag.
If an MP3/WMA disc that contains over 511 files is played, the disc
may not be played as shown in the illustration.
When you operate the unit on battery power, you cannot turn on the unit using the remote.
A digital music player is charged automatically in the USB mode when
USB section
MP3/WMA disc (Example: When you place MP3 disc)
Supported bit rate
MP3 (MPEG 1 Audio Layer-3):
32 - 320 kbps, VBR
WMA:
.
connected to the
(USB) port
Closing the Sliding Tray
1
16-320Kbps,VBR
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
Preparing the remote
Remove the USB device (see “Listening to music of a
USB device”).
Insert two R03 (size AAA) batteries (not supplied).
File number
After the file name is displayed, the
playing time will appear
WMA:
2
Slide the Lock
as indicated by the arrow.
32/44.1/48kHz
(USB) port
USB-A (Full Speed)
To
Press
General
again.
Pause playback
. To resume play, press it
Connecting optional components
Speaker
Full range: 8 cm (3 1
/4 inches) dia., 4 Ω, cone type (2)
You can enjoy the sound from an optional component
such as a portable digital music player through the
speakers of this unit. Be sure to turn off the power of each
component before making any connections. For details,
refer to the instruction manual of the component to be
connected.
Input
.
Stop playback
(USB) port: Type A, maximum
current 500 mA
Replacing batteries
.
Go to the next
track/MP3/WMA
file
Go back to the
previous track/
MP3/WMA file
Select a folder on
an MP3/WMA
disc
Locate a point
while listening to
the sound
AUDIO IN jack (stereo minijack)
With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all
the batteries with new ones.
Outputs
Headphones jack (stereo minijack)
For 16 - 68 Ω impedance headphones
Power output
.
Lock
1
Connect the AUDIO IN jack
on the unit to the line
1.7 W + 1.7 W (at 4 Ω, 10% harmonic distortion)
Power requirements
For player:
Malaysia and Singapore models: 230 – 240 V AC, 50 Hz
ailand model: 220 V AC, 50 Hz
Korea model: 220 V AC, 60 Hz
Other models: 230 V AC, 50 Hz
9 V DC, 6 R14 (size C) batteries
For remote control:
output jack of the portable digital music player or
other components using an audio connecting cable
(not supplied).
3
Push the Sliding Tray
into the unit until it clicks.
+ on the unit to go forward and
– to go backward
Notes
.
Do not carry the unit with a USB device inserted to the connector.
Doing so may cause a malfunction.
2
3
Turn the unit and the connected component on.
Be sure to store the Sliding Tray
before moving the unit.
Press AUDIO IN
and start playing sound on the
(forward) or
(backward)
connected component.
3 V DC, 2 R03 (size AAA) batteries
Power consumption
AC 13 W
on the unit while playing and
e sound from the connected component is output
from the speakers.
hold it until you find the point.
Locate a point
while observing
the display
(forward) or (backward)
on the unit in pause and hold it
To connect the unit to a TV or VCR, use an extension
cable (not supplied) with a stereo-mini jack on one end
and two phono plugs on the other end.
until you find the point.
.
Remove the CD
PUSH OPEN/CLOSE
|